cold-resistant and hot-resistant RTV adhesive sealants
Product Description:
cold-resistant and hot-resistant RTV adhesive sealants.Operating instructions:1. Clean surfaces: Is stuck or is been clean by the spreading surface reorganization, except rust stain, dust and greasy dirt and so on.2. The glue: With a blade cut open the front part, cover on pointed tips mouth, with extrusion gun will glue crowded to already clean surface. Will be sticking surface to close up fixedly.3.Solidification: Will paint the part sets in the air, lets its room temperature solidify 5-20min and watch to do, completely solidifies apparent thickness to decide(the 3mm thickness ,the room temperature 25°C, the humidity50%,24hours may completely solidify. Solidification limit thickness is 10mm).Contains: Poly (dimethyl silicone polymer); Silicon dioxide ; vinyl oximinoslae; calcium carbonate.Matters needing attention;1. The pressure connected to the applicator should be 0.2-0.4Mpa when using pneumatic applicator.2. Please in well ventilated place is good, if contact with eyes or skin, please rinse immediately.Store: Store in dry shade under 28 °C degrees away from children.Main Characteristics of Silicone Rubber KDW-1536Before cureexteriorwhite/blackviscosity pa.s ~surface curing time min5-30After curetemperature-resistant °C-60~+250tensile strength Mpa≥4elongation %≥250shaw strength A≥25sheating strength Mpa≥4racking strength KN/m≥5electrical surface resistivty Ω≥1×1014electrical volume resistivty Ω.cm≥5×1014specific inductive capacity 1MHz≤3.5dielectric loss angle tangent value 1MHz≤5×10-3insulating strength KV/mm≥20maximum curing depth mm7~10
About Us
Liyang Kang Dawei Industrial Co., Ltd. (also known as Liyang City Kang Dawei Plastic Industry Professional Factory) is dedicated to the development and production of silicone adhesives and silane coupling agents. Our company was founded in 1997, and is located in the Tianmuhu Lake Industrial Park, in Liyang City, Jiangsu Province. We produce both silicone adhesives and silicone processing equipment. Holding ISO9001:2000 and ISO/TS16949:2002 quality system certification, we are a high-tech company that strives for excellence and provides good customer service. Our company is guided by the market, and is devoted to customer satisfaction.
