poe 16 ports gigabit concentrated network long-distance power supply implement
Product Description:
poeFeatures and functionsPROCET PT- PSE1601G is a sixteen ports gigabit concentrated network long-distance power supply implement. It is suitable for indoor, can work regularly between input voltage 165VAC ~ 280VAC.This power supply use super type 5 cable to connect with network terminal equipment, suitable for 10/100/1000M network environment.ModelPT- PSE1601GSystem reliabilityMTBF>100k hoursNo. of Ports16 PortsTemperature-15°C~+55°CRelative humidity5%~90%RH Input voltage100VAC~280VAC,47Hz~63Hz Maximum output power300W Output voltage regulation accuracy-48VDC±2% Load regulation-48VDC±1% Dimensions436(W) x44 (H) x210 (D) mm Weight<4kg DC output voltage of broadband noise3.4kHz~150kHz≤50mv 0.15MHz~30MHz≤20mvRange of output over-voltage protection-52VDC~-50VDCOver-temperature protection>100°C Over-current protection(Single circuit)350Ma~400Ma Over voltage protectionInput voltage >290VAC~310VAC Over voltage recovery pointInput voltage > 285VACUnder voltage protection<85VAC~90VAC Under voltage recovery point<100VAC Safety Approvals CE,RE,EN55022,CLASSB Discrete noise voltage3.4KHz~150KHz≤5mv
150KHz~200KHz≤3mv
200KHz~500KHz≤2mv
0.5MHz~30MHz≤1mvEthernet ports light instructions
Red light POWER on:Show power working normally
Green light ACTIVE on: show equipment supply power normallyGreen light in network port is on and then off after several seconds show overload protection or short circuit.Red light shining slightly in use shows feed part of the network port is off-loads, can judge there is a glitch of the power supply or far-end equipment.Installation and Commissioning.1. Insert the input power line into 100--220VAC introducing input socket.2. Connected to the output signal respectively
3. Connect communicating & introducing line, signal wire, output lines tightly to avoid bad contacts and loose.Note:
Item 1: The installation site must be away from heat source and electromagnetism interference source, non-corrosive gas and metal dust.
Item 2:Mustn't block the cooling hole of the equipment.Item 3: Installation must be stable fixed placing, not a violent shock.
Item 4: Note whether the AC input voltage is during the range of 100VAC ~ 280VAC.
Item 5: Prevent to crash and conflict with other equipment during the installation, so as not to causelocal damage of the machine surface.Boot Test 1 Using resistance gears of millimeter to detect Ac input, short circuit phenomena did not exit; after loading, green light in output interface is on shows output normally. If it is off after several seconds shows short circuit and limited flow phenomena did exit.
2. After electric communication, the working light in front board is on.Daily maintenance and maintenance:Long-distance power supply PROCET PT-PSE1601G can work uninterruptedly,to guarantee the reliability of the power supply, must prepare daily maintenance work, make the power system in the best working state.
1. Clean power source regularly to prevent dirt retention phenomenon2. Check whether the connecting line of input and output is loose or contact undesirable, if damaged, please change in time.Transportation:In handling process please handle with care, do not make it strong impact.. It should be placed strictly according to the direction of instructions in packing during transportation or may cause glitch or damage.Storage:
When storing, must be kept in dry warehouse, not exposure to sun and rain.
Storage temperature:-5°C~+55°C (low temperature storage recovery time is at least 4 hours),
Relative humidity:5% ~90%RH
About Us
Beijing Chuangxin Lianjie Network Technology Co., Ltd. is a high and new technology company specialized in the development, manufacture and sale of POE network technology. Our R&D center is established in Beijing and production base is located in Langzhou Industrial Park in Guangzhou. IEEE released 802.3af and 802.3at enhanced network power supply system standard.Beijing Chuangxin Lianjie Network Technology Co., Ltd. developed POE series products which comply with IEEE802.3af/802.3at standard and consequently satisfies the power supply requirement of high-power network terminals of new models. We began to develop single port POE products in 2002 and sell all kinds of POE products which are widely applied in many industries, especially in telecom operators and large enterprise networks. We have produced over 50 species of POE products in batches and provided flexible and reliable network power supplies for terminals, like wireless networks, video cameras, AP and industrial networks.
